Ventilator on Rent in Delhi – The Complete Family Guide(2026)

Receiving the words "your patient needs ventilatory support at home" is one of the most overwhelming moments a Delhi family can face. The hospital is ready to discharge, the ICU bed is needed for another patient, but the person you love still cannot breathe independently. What do you do? Where do you start? How do you recreate what a hospital does – in your living room? The good news is that home ventilation is not only possible, it is now widely practised across Delhi, Noida, Gurgaon, and Faridabad. Modern non-invasive ventilators – primarily BiPAP machines in ST and AVAPS modes – can provide the same breathing support as many hospital setups, at a fraction of the cost, and in the comfort of home. Healthy Jeena Sikho has helped over 1 lakh patients and families across Delhi NCR set up home respiratory care, from simple CPAP for sleep apnea to full home ICU configurations for patients with ALS, advanced COPD, and post-ICU discharge.

This guide is the most comprehensive resource available for Delhi families navigating home ventilation. We cover every device available, every condition that requires it, a complete room-by-room ICU setup guide, caregiver training requirements, emergency protocols, pricing, and how to book. Read it in full – or use the section headings to jump to what you need most.

Section 1 – Understanding Home Ventilation: What It Really Means

1.1 What Is Home Ventilation?

Home ventilation refers to the use of a mechanical or pressure-support device to assist or completely take over a patient's breathing, outside of a hospital setting. The term covers a wide spectrum – from a BiPAP machine delivering gentle pressure support to a fully invasive ventilator supporting a tracheotomised patient. The majority of home ventilation in India, however, falls into the category of non-invasive ventilation (NIV) specifically BiPAP therapy – which uses a mask rather than a breathing tube.

Non-invasive ventilation works by creating a pressure gradient through a sealed mask. During inhalation, the machine delivers a higher pressure (IPAP – Inspiratory Positive Airway Pressure) that inflates the lungs. During exhalation, the pressure drops to a lower level (EPAP – Expiratory Positive Airway Pressure) so the patient can breathe out comfortably. In ST (Spontaneous/Timed) mode, the machine also delivers a guaranteed backup breath if the patient fails to breathe within a set time window. This is the critical feature that separates a simple BiPAP from a life-support-capable device.

In Delhi's home care context, the most important distinction is between devices that provide support for breathing (the patient initiates every breath, the machine helps) versus devices that can sustain breathing (the machine delivers mandatory breaths even if the patient cannot initiate them). The latter – machines like the ResMed Stellar 100 and Philips Respironics A40 in AVAPS mode – are what most families think of when they say "ventilator."

1.2 Who Needs Home Ventilation in Delhi?

The need for home ventilation arises when a patient's respiratory muscles are too weak, their airways too obstructed, or their lung capacity too reduced to maintain adequate breathing without support. In Delhi NCR, the most common patient profiles Healthy Jeena Sikho serves are:

Patient Category	Why Ventilation Is Needed	Typical Device
COPD – Severe / Stage 4	Chronic CO2 retention; respiratory muscle fatigue	BiPAP ST mode
Post-ICU Discharge	Partially weaned off hospital ventilator	BiPAP ST / AVAPS
ALS / Motor Neuron Disease	Progressive respiratory muscle weakness	BiPAP AVAPS or Stellar 100
Duchenne Muscular Dystrophy	Chest wall + diaphragm weakness	BiPAP AVAPS
Obesity Hypoventilation Syndrome	Weight-restricted breathing, CO2 buildup	BiPAP ST / AVAPS
Spinal Cord Injury (C3–C5)	Diaphragm paralysis	BiPAP or full ventilator
Severe Sleep Apnea + COPD (Overlap)	Dual pathology; CPAP not sufficient	BiPAP ST mode
Post-COVID Respiratory Failure	Lung fibrosis, reduced compliance	BiPAP ST / AVAPS
Congestive Heart Failure	Pulmonary oedema, nocturnal breathing failure	BiPAP / CPAP
Stroke with Bulbar Palsy	Weak swallowing + breathing muscles	BiPAP (with anti-asphyxia valve)

Section 2 – Types of Respiratory Support Devices Available in Delhi

Not all ventilators are the same. Families are often confused by the terminology – BiPAP, VPAP, NIV, AVAPS, Stellar – because each represents a different level of clinical capability. Understanding where your patient sits on this spectrum is the first step to choosing the right machine.

Device Type	How It Works	Modes Available	Clinical Use Case	Rent/Month
CPAP	Fixed single pressure	CPAP, AutoCPAP	OSA, snoring, mild apnea	Rs. 2,500+
BiPAP – S Mode	Dual pressure: IPAP + EPAP, patient-triggered (Spontaneous)	S (Spontaneous)	Moderate OSA, mild COPD	Rs. 3,000+
BiPAP – S/T Mode	Dual pressure + timed backup breaths	S/T (Spontaneous/Timed)	Severe COPD, OHS, overlap syndrome	Rs. 3,500+
BiPAP – Auto	Auto-adjusting IPAP + EPAP	Auto, S/T-Auto	OSA varying severity, comfort-focused	Rs. 4,000+
VPAP ST / ST-A	Advanced bilevel with AVAPS option	S/T, AVAPS, PC-SIMV	ALS, NMD, post-ICU step-down	Rs. 5,000+
Home Ventilator (Stellar 100)	Full ventilatory modes incl. volume control	CPAP, S, S/T, PC, iVAPS, AVAPS	ALS, SCI, complex respiratory failure	Rs. 10,000+

2.1 BiPAP Modes Explained: S, S/T, AVAPS, and iVAPS

The mode programmed into a BiPAP machine is what determines its clinical capability. Many families rent a BiPAP thinking all machines are equivalent – they are not. Here is what each mode actually does:

Mode	Full Name	What It Does	Who Needs It
S	Spontaneous	Patient triggers every breath; machine supports IPAP + EPAP	OSA, mild–moderate COPD
S/T	Spontaneous/Timed	Adds backup rate – if patient stops breathing, machine delivers breaths	Severe COPD, OHS, post-ICU
Auto S/T	Auto Spontaneous/Timed	Automatically adjusts pressures + backup	Complex OSA, varying needs
AVAPS	Average Volume-Assured Pressure Support	Targets a set tidal volume; adjusts pressure accordingly	ALS, NMD, OHS (when consistent tidal volume is critical)
iVAPS	Intelligent Volume-Assured Pressure Support	ResMed’s next-gen AVAPS with alveolar ventilation targeting	Advanced NMD, SCI, complex failure
PC	Pressure Control	Machine controls every breath at a fixed rate (like ICU ventilator)	Fully dependent patients

Key Rule: ST Mode is the Minimum for Home Ventilation

• Any patient being discharged from an ICU with respiratory support needs at minimum a BiPAP in S/T mode with a configured backup rate.

• BiPAP in S mode alone is NOT safe for patients who may stop breathing – it will not deliver a rescue breath.

• Always confirm the mode with your discharging pulmonologist before renting. HJS will configure the device to your prescription.

Section 3 – Every Device Available: Full Model Guide & Prices

Healthy Jeena Sikho stocks the full range of respiratory support devices in Delhi – from basic BiPAP to home ventilator level. Here is a complete model-by-model breakdown with clinical positioning, so you and your doctor can identify the right device.

3.1 Entry-Level BiPAP (S and S/T Mode)

Model	Mode	Pressure Range	Key Feature	Rent/Month	Buy Price
Niscomed BiPAP	S	4–25 cm H₂O	Compact, affordable, reliable for OSA/mild COPD	Rs. 3,000	Rs. 30,000
Oxymed AirSmart	Auto	4–25 cm H₂O	Auto-adjusting dual pressure, built-in humidifier	Rs. 3,000+	Rs. 40,000
BMC Y30T Auto	Auto BiPAP	4–30 cm H₂O	3.5" colour LCD, auto IPAP/EPAP, data logging	Rs. 3,500+	Rs. 43,000
Evox Noah Sleep 25ST	S/T	4–25 cm H₂O	Backup rate, rise time control, suitable for COPD	Rs. 3,500+	Rs. 46,000

3.2 Mid-Range BiPAP / VPAP with Advanced Modes

These machines are clinically positioned between a standard BiPAP and a home ventilator. They support S/T mode with backup rates, sensitivity tuning, rise time control, and in some cases AVAPS – making them suitable for COPD patients, post-ICU step-down, and neuromuscular disease in early stages.

Model	Mode	Pressure Range	Key Feature	Rent/Month	Buy Price
ResMed Lumis 100 VPAP ST	S/T	4–30 cm H₂O	Backup rate, rise time, sensitivity; ResMed's entry home NIV	Rs. 5,000+	Rs. 50,000
Philips DreamStation Auto BiPAP	Auto BiPAP	4–25 cm H₂O	Flex technology for exhale comfort; heated humidifier; app connectivity	Rs. 8,000+	Rs. 72,000
ResMed Lumis 150 VPAP ST	S/T + backup	4–30 cm H₂O	Higher range, full ST with timed backup; O₂ enrichment support	Rs. 7,500+	Rs. 68,000

3.3 Advanced VPAP / Home Ventilator Level

These are the machines prescribed for the most complex home respiratory patients – ALS, spinal cord injury, Duchenne MD, and patients whose hospital ventilator cannot be fully weaned. They combine all the features of a BiPAP with intelligent volume targeting and ventilator-grade safety alarms.

Model	Modes	Volume Target	Alarms	Rent/Month	Buy Price
ResMed Lumis 150 VPAP ST	S, S/T, Auto, AVAPS	Yes – AVAPS	Disconnect, low SpO₂, apnea	Rs. 6,000+	Rs. 1,10,000
Philips Respironics A40	S, S/T, S/T-Auto, AVAPS-AE	Yes – AVAPS-AE	Full alarm suite, remote monitoring capable	Rs. 7,000+	Rs. 1,80,000
ResMed Stellar 100	CPAP, S, S/T, T, PC, iVAPS, AVAPS	Yes – iVAPS + AVAPS	Full ICU-grade alarm suite; 8-hour internal battery	Rs. 30,000+	Rs. 2,15,000

About the ResMed Stellar 100 – Delhi's Most Advanced Home Ventilator

• iVAPS (intelligent Volume-Assured Pressure Support): targets alveolar ventilation, not just tidal volume adapts as patient's condition changes over time

• 8-hour internal battery: continues working during Delhi power outages without an inverter

• Full alarm suite: disconnect alarm, apnea alarm, low SpO2, high leak, power failure

• Invasive + non-invasive capability: can be used with a trach mask or full face mask

• Prescribed for ALS, Duchenne MD, SCI, and complex COPD by pulmonologists in AIIMS, Medanta, Fortis across Delhi NCR

Section 4 – Conditions Requiring Home Ventilation: A Detailed Guide

4.1 Advanced COPD (Stage 3 and Stage 4)

COPD is the most common reason for home BiPAP therapy in Delhi. In Stages 3 and 4 (severe and very severe), the lungs have lost the elasticity to expel CO2 efficiently. CO2 accumulates in the blood – a condition called hypercapnia – causing headaches, drowsiness, and eventually respiratory failure. BiPAP in S/T mode at night prevents this accumulation by increasing ventilation, resting the respiratory muscles, and improving daytime blood gas levels.

The typical COPD home BiPAP prescription in Delhi sets IPAP at 14–20 cm H2O, EPAP at 4–6 cm H2O, backup rate at 12–14 breaths/minute, and rise time at 2–3 (medium). The machine used is typically a ResMed Lumis 100 or 150 VPAP ST – available from HJS at Rs. 4,000–5,000/month.

4.2 ALS / Motor Neuron Disease (MND)

ALS (Amyotrophic Lateral Sclerosis) is a progressive neurological disease that gradually paralyses all voluntary muscles – including the diaphragm and intercostal muscles responsible for breathing. Most ALS patients in Delhi begin requiring NIV support when their FVC (Forced Vital Capacity) drops below 50% of predicted. At this stage, nighttime BiPAP use dramatically improves survival, quality of life, and cognitive function.

ALS NIV prescription typically uses AVAPS mode – where the machine continuously adjusts pressure to guarantee a target tidal volume (usually 6–8 ml/kg of ideal body weight). As the disease progresses and daytime support is needed, the patient transitions to the ResMed Stellar 100 in iVAPS mode. HJS supports ALS families with machine upgrades as needs evolve, without requiring a new security deposit.

4.3 Obesity Hypoventilation Syndrome (OHS)

OHS is increasingly common in Delhi's urban population. It occurs when excess body weight restricts the chest wall and diaphragm, reducing the drive to breathe – especially during sleep. Patients typically have OSA as well. Unlike pure OSA where CPAP is adequate, OHS requires the bilevel pressure of a BiPAP to offload the work of breathing and prevent CO2 retention. Most OHS patients in Delhi are started on S/T mode with higher IPAP settings (16–22 cm H2O).

4.4 Post-ICU Discharge – Step-Down Home Ventilation

One of the most common urgent calls Healthy Jeena Sikho receives is from families whose relative is being discharged from a Delhi hospital ICU, still requiring breathing support. The hospital needs the bed, the patient is medically stable but not completely independent. In these cases, a home BiPAP or VPAP in ST/AVAPS mode serves as a bridge – either toward full independence or as long-term support.

Post-ICU patients in Delhi typically arrive home with a detailed NIV prescription from their pulmonologist. HJS configures the device to the exact prescription, delivers it before the patient arrives home, and provides caregiver training on the same day. For these cases, we recommend same-day booking – call the moment you receive the discharge date from the hospital.

4.5 Duchenne Muscular Dystrophy and Other NMDs

Duchenne MD, Spinal Muscular Atrophy (SMA), and other neuromuscular diseases cause progressive respiratory muscle weakness. Children and young adults with these conditions often require NIV initially at night, transitioning to 16–24 hours/day as the disease progresses. For families in Delhi managing a young patient with NMD, the Philips A40 in AVAPS-AE mode or ResMed Stellar 100 in iVAPS mode provides the most flexible and reliable home ventilation.

4.6 Stroke with Respiratory Compromise

Stroke patients who develop bulbar palsy lose the ability to coordinate swallowing and breathing properly. When combined with significant OSA or aspiration pneumonia, these patients often need BiPAP support. An important consideration for stroke patients is anti-asphyxia valve compatibility in the mask – ensuring that if the machine fails, the patient can still breathe room air through the valve. HJS ensures correct mask selection for all stroke patients in its Delhi care protocol.

Section 5 – Complete ICU at Home Setup Guide for Delhi Families

Setting up an ICU at home in Delhi is a significant undertaking – but it is entirely achievable with the right equipment, layout, and support. Healthy Jeena Sikho has set up hundreds of home ICU configurations across Delhi, Noida, Gurgaon, and Faridabad. Below is the complete framework.

5.1 Room Requirements

Requirement	Specification	Why It Matters
Room size	Minimum 10 × 12 feet	Space for bed, equipment trolley, caregiver movement
Power sockets	4–6 sockets near bed; ideally 2 on each side	Ventilator, oxygen concentrator, suction machine, monitor all need power
Inverter / UPS	Minimum 1500 VA inverter; 2–4 hour battery backup	Backup during power cuts – ventilator cannot stop even for 1 minute
Ventilation	Cross-ventilation or air conditioning	Oxygen concentrators generate heat; room must not overheat
Door width	Minimum 30 inches (76 cm)	Hospital beds and equipment must fit through the doorway
Flooring	Non-slip, easy to clean	Reduces fall risk; enables thorough disinfection
Lighting	Overhead + bedside adjustable	Allows caregiver to monitor patient colour, breathing pattern
Wall-mounted clock	Visible from bed	For respiratory rate counting, timing medications

5.2 Core Equipment for a Delhi Home ICU

A complete home ICU configuration in Delhi typically includes the following equipment. All items listed below are available for rent from Healthy Jeena Sikho on a single consolidated basis – one call, one delivery, one team.

Equipment	Purpose	Model Recommended	Rent/Month
Hospital ICU Bed	Patient positioning, pressure sore prevention, CPR access	Remote-controlled (≈230 kg capacity, IEC 60601, CPR lever)	Rs. 3,000
BiPAP / Ventilator	Primary respiratory support	ResMed Lumis 150 ST-A or Stellar 100	Rs. 6,000–10,000+
Oxygen Concentrator	Supplemental O₂ to be blended with BiPAP circuits	Philips Everflo 5L or Oxymed 10L	Rs. 4,500–6,500
Pulse Oximeter	Continuous SpO₂ and heart rate monitoring	Fingertip or wrist-type (24-hour logging)	NA
Suction Machine	Airway secretion clearance	Portable electric suction unit	Rs. 1,500–2,500
Air Mattress (Anti-Bedsore)	Prevent pressure ulcers in immobile patients	Alternating pressure mattress	Rs. 1,500–2,500
Wheelchair	Transfers, short mobility, physiotherapy	Manual or electric (as per patient need)	Rs. 2,000–7,000
Overbed Table	Meals, device tablet, communication board	Height-adjustable	Rs. 500
IV Stand	Fluid administration, feeding pump mounting	Stainless steel adjustable	Rs. 500

5.3 Connecting Oxygen to the BiPAP Circuit

Many patients on home BiPAP also require supplemental oxygen. This is done by connecting the oxygen concentrator's outlet tubing to the dedicated oxygen enrichment port on the BiPAP machine – available on the ResMed Lumis 100/150 and Stellar 100. The flow rate of oxygen added is prescribed by the pulmonologist (typically 1–4 LPM) and must not be increased without medical advice.

Using a standalone oxygen mask without BiPAP in hypercapnic COPD patients is dangerous – high-flow oxygen can suppress the hypoxic drive to breathe in these patients, worsening CO2 retention. BiPAP ensures ventilation is maintained while delivering prescribed oxygen. This is a critical point that many families and even some home care nurses miss.

Oxygen + BiPAP: Critical Safety Rules

• NEVER increase oxygen flow above the prescribed rate without doctor advice • The BiPAP must remain running whenever supplemental O2 is being delivered through the circuit

• Check SpO2 target with your pulmonologist – most COPD patients target 88–92%, NOT 98–100%

• High SpO2 in COPD can suppress breathing drive – it is not always 'better'

• If the BiPAP circuit disconnects while O2 is running, call HJS helpline immediately

Section 6 – Ventilator vs BiPAP: Which Does Your Patient Need?

The word "ventilator" is used loosely by families, hospitals, and even some doctors. In Delhi's home care market, what most patients labelled as needing a "ventilator" actually need a high-end BiPAP in ST or AVAPS mode. Conversely, some patients rented a simple BiPAP when they needed a true home ventilator. This table clarifies the correct choice.

Clinical Scenario	Correct Device	Key Reason	Rent/Month
Sleep apnea with CO₂ retention	BiPAP ST mode	Backup rate prevents apneas; EPAP keeps airway open	Rs. 3,500+
COPD, daytime hypercapnia, SpO₂ drop at night	BiPAP ST / Lumis 100 VPAP ST	NIV at night corrects CO₂ without sedation	Rs. 4,000+
COPD + frequent hospital admissions	Lumis 150 VPAP ST or ST-A	Ensures consistent ventilation even as disease worsens	Rs. 5,000+
OHS – BMI >40, morning headaches, pCO₂ high	BiPAP ST-A or AVAPS	Volume-targeted mode handles high work of breathing	Rs. 5,000+
ALS early stage – FVC 40–60%	Lumis 150 ST-A or Philips A40	AVAPS mode adapts as FVC declines	Rs. 6,000+
ALS advanced / SCI / DMD – FVC <30%	ResMed Stellar 100 (iVAPS)	Full ventilator modes; 8-hr battery for power outages	Rs. 10,000+
Post-ICU, still on hospital ventilator	ResMed Stellar 100	iVAPS / AVAPS bridges from ICU to home safely	Rs. 10,000+
Tracheostomy with home ventilation	ResMed Stellar 100 (invasive)	Only device that supports invasive interface at home ventilation	Rs. 10,000+
Short-term post-surgery respiratory support	BiPAP S or S/T mode	Temporary support; rent monthly, return when recovered	Rs. 3,000+

Section 7 – 10-Step Process to Set Up Home Ventilation in Delhi

The transition from hospital to home ventilation must be planned meticulously. Rushing this process is the most common cause of preventable readmissions in Delhi NCR. Follow this sequence

Step	Action	Who Does It	When
1	Get prescription specifying: device type, IPAP, EPAP, backup rate, rise time, target SpO₂ range	Pulmonologist	Before discharge
2	Assess the room, confirm inverter capacity; share room photo if needed	HJS team / family	1–2 days before discharge
3	Book equipment (BiPAP/ventilator, hospital bed, oxygen concentrator, suction machine, etc.)	Family / coordinator	1–2 days before discharge
4	Deliver equipment to home; same-day delivery available in NCR if booked early	HJS delivery team	1 day before / day of discharge
5	Configure device settings; lock or document to avoid accidental changes	Technician	During delivery
6	Position equipment correctly (bed placement, oxygen, suction, power access)	Technician	During setup
7	Provide caregiver training (machine use, mask fitting, alarms, emergency handling)	Technician	Delivery day
8	First monitoring session (~30–60 min); ensure comfort, no mask leaks, stable SpO₂	Technician + Family	Same day
9	Follow-up call to confirm patient stability and equipment functioning	HJS support team	Next day after discharge
10	Ongoing support + maintenance; replacement if malfunction; monthly check-ins	HJS team	Throughout usage

Section 8 – Caregiver Training: What Every Home Nurse Must Know

The caregiver is the most important safety system in a home ICU. No machine replaces a trained human observer. Whether you have engaged a professional home care nurse through an agency, or a trained family member is providing care, the following knowledge is non-negotiable.

Skill Area	What the Caregiver Must Know How To Do	Frequency
Mask Fitting	Properly fit the mask (full-face or nasal), eliminate leaks, and quickly refit in emergencies	Every session
Starting & Stopping BiPAP	Turn the machine on/off, use ramp mode, and safely connect/disconnect the patient	Every session
Alarm Recognition	Identify and respond to alarms such as high leak, apnea, low SpO₂, power failure, and disconnection	Whenever alarm sounds
SpO₂ Monitoring	Apply the pulse oximeter, read SpO₂ and heart rate, and understand target ranges	Continuous / hourly
Airway Suctioning	Use the suction machine, remove secretions, and recognize signs of buildup	As needed / morning
Position Changes	Reposition the patient every 2 hours and check pressure points	Every 2 hours
Emergency Response	Use CPR position lever and understand when to call a doctor or support team	Immediate when needed
Humidifier Maintenance	Use distilled water and keep the chamber clean	Daily + weekly cleaning
Mask Hygiene	Wipe the mask daily, wash weekly, and replace the cushion as needed	Daily + weekly
Circuit Check	Inspect tubing for cracks or kinks and drain accumulated water	Every morning

HJS Caregiver Training – What's Included

• 45-minute in-person session at the time of equipment delivery

• Hands-on mask fitting practice on the patient

• Written emergency checklist left at the bedside Ventilator on Rent in Delhi – Home ICU Guide 2025

• WhatsApp-accessible video guides for mask fitting and alarm response

• 24/7 live helpline – trained HJS staff respond, not just automated messages

Section 9 – Emergency Protocols: What to Do When Something Goes Wrong

Every family managing a home ventilator patient must have a written emergency protocol posted at the bedside. The following covers the most common emergencies encountered in Delhi home ICU settings.

Emergency Situation	Immediate Action	Then Call
BiPAP alarm (high leak)	Check the mask and adjust the headgear; if the leak continues, switch to a backup mask	If not resolved within 5 minutes → contact support team
Apnea alarm (no breath detected)	Stimulate the patient; check chest movement; if unresponsive → place in CPR position	Call doctor / emergency services (112) immediately
Power failure	Check main power supply; ensure inverter auto-switches; if it fails, use battery backup	Contact support team / arrange backup
Low SpO₂	Check mask fit; assess patient’s breathing; ensure oxygen concentrator is working	Inform doctor immediately
Patient not tolerating mask	Remove mask temporarily; allow patient to relax; retry after 5 minutes	If issue persists → contact support team
Secretion / choking	Use suction machine for oral suction; avoid deep suction	Call doctor if condition does not improve
Machine malfunction	Provide manual breathing support (if trained); do not restart if device is faulty	Request immediate replacement from support
Patient condition worsening	Check SpO₂, respiratory rate, and skin color; do not delay if serious	Call emergency / doctor immediately

Section 10 – Daily Monitoring Parameters for Home Ventilation Patients

Structured daily monitoring is what separates a safe home ICU from a high-risk one. The following table defines the parameters every caregiver should record in a bedside log at minimum twice daily – morning and evening. This log should be shared with the treating pulmonologist at every follow-up.

Parameter	How to Measure	Normal Target	Act If
SpO₂ (blood oxygen)	Pulse oximeter (fingertip)	88–95% (COPD: 88–92%)	<85% or sudden drop → call the doctor
Heart rate	Pulse oximeter	60–100 bpm	<50 or >120 → call the doctor
Respiratory rate	Count chest rises for 60 seconds	12–20 breaths/min	<8 or >30 → urgent doctor call
Mask leak	BiPAP screen (shows leak in L/min)	<24 L/min	Adjust mask; if persistent → call support
Machine usage hours	BiPAP data screen	As prescribed (minimum 6 hrs/night)	<4 hrs → discuss compliance with doctor
AHI (apnea events)	BiPAP data screen (if available)	<5 events/hour	If AHI is increasing → review prescription
Pressure sore check	Visual skin inspection	No redness on bony areas	If redness appears → change position immediately
Circuit condensation	Visual check of tubing	None / minimal	Drain water or adjust heated tubing
Urine output (catheter)	Measure using graduated container	>30 ml/hour	<30 ml in 2 hours → call the doctor

Section 11 – Complete Price Guide: Rent and Buy in Delhi

11.1 All Respiratory Support Devices – Rent and Buy Prices

Device	Brand	Mode	Rent/Month	Buy Price	Best For
Niscomed BiPAP	Niscomed	S	Rs. 3,000	Rs. 30,000	OSA, mild COPD
Oxymed AirSmart BiPAP	Oxymed	Auto	Rs. 3,000+	Rs. 40,000	Comfort, auto-adjusting
BMC Y30T Auto BiPAP	BMC	Auto	Rs. 3,500+	Rs. 43,000	Auto, data logging
Evox Noah Sleep 25ST	Evox	S/T	Rs. 3,500+	Rs. 46,000	COPD, backup rate needed
ResMed Lumis 100 VPAP ST	ResMed	S/T	Rs. 4,000+	Rs. 50,000	Severe COPD, OHS
Philips DreamStation Auto BiPAP	Philips	Auto	Rs. 5,000+	Rs. 72,000	Comfort, flex technology
ResMed Lumis 150 VPAP ST	ResMed	S/T + backup	Rs. 5,000+	Rs. 68,000	Advanced COPD
ResMed Lumis 150 VPAP ST-A	ResMed	ST-A + AVAPS	Rs. 6,000+	Rs. 1,10,000	ALS early, OHS, post-ICU
Philips Respironics A40	Philips	AVAPS-AE	Rs. 7,000+	Rs. 1,80,000	ALS advanced, NMD
ResMed Stellar 100	ResMed	iVAPS + all modes	Rs. 10,000+	Rs. 2,15,000	Full home ventilator – ALS, SCI, tracheostomy

11.2 Complete Home ICU Package – Monthly Rental Estimate

Equipment	Rent/Month	Notes
Paramount A5 ICU Hospital Bed	Rs. 12,000	230 kg, CPR function, IEC 60601
ResMed Lumis 150 VPAP ST-A or Stellar 100	Rs. 7,500–10,000	Configured to prescription
5L Oxygen Concentrator	Rs. 4,500	Philips Everflo or equivalent
Anti-Bedsore Air Mattress	Rs. 1,500	Alternating pressure system
Suction Machine	Rs. 1,500	Portable, hospital-grade
Pulse Oximeter (continuous)	NA	SpO₂ + HR logging
Estimated Total / Month	Rs. 26,000–30,000	vs hospital cost of Rs. 20,000–60,000+ per day in Delhi hospital

* Package pricing available – call HJS for a customised quote based on exact prescription requirements.

Section 12 – Rent vs Buy: The Delhi Family's Financial Guide

For patients needing a BiPAP or ventilator in Delhi, the rent vs buy decision is significant – machines range from Rs. 30,000 to Rs. 2,15,000. The right choice depends on prognosis, certainty of long-term need, and cash flow.

Factor	Rent	Buy
Upfront cost	Rs. 3,000–10,000/month	Rs. 30,000–2,15,000 one-time
Best for	Uncertain duration, trial, post-ICU step-down	Confirmed long-term need (COPD, ALS, NMD)
Machine servicing	Free – faulty machine replace	Your responsibility
If condition improves	Return machine – no loss	Sell at 40–60% depreciated value
If condition worsens	Upgrade to higher-spec model (same rental model)	Buy new machine
Power outage (Delhi)	Stellar 100 (rental) has 8-hr internal battery	Same benefit only if owned
Prescription changes	HJS reconfigures at no charge	Clinic visit required
Break-even (Lumis 150)	~18 months (Rs. 5,000/mo vs Rs. 68,000 buy)	Economical after 14–18 months
Break-even (Stellar 100)	~21 months (Rs. 10,000/mo vs Rs. 2,15,000 buy)	Economical after 21+ months

Section 13 – Delivery Areas Across Delhi NCR

City / Zone	Areas Covered	Delivery
Central & South Delhi	Lajpat Nagar, Hauz Khas, Saket, Vasant Kunj, Defence Colony, Greater Kailash, Nehru Place, Malviya Nagar	Same Day
North & West Delhi	Rohini, Dwarka, Janakpuri, Punjabi Bagh, Pitampura, Paschim Vihar, Shalimar Bagh	Same Day
East Delhi	Mayur Vihar (all phases), Patparganj, Preet Vihar, Laxmi Nagar, Vivek Vihar, Anand Vihar	Same Day
Noida	All sectors 1–137, Greater Noida, Noida Extension, Expressway, Sector 150	Same Day
Gurgaon	DLF Phases 1–5, Golf Course Road, Sohna Road, Cyber City, Palam Vihar, Manesar, New Gurgaon	Same Day
Faridabad	All sectors, Ballabgarh, NIT, Sector 31–44	Same Day
Ghaziabad	Indirapuram, Vaishali, Raj Nagar Extension, Modinagar, Kaushambi, Vasundhara	Same Day
Greater Noida West	Gaur City, Supertech, Amrapali, Crossings Republik	Same Day
Chandigarh / Mohali	Sector 17–47, Zirakpur, Panchkula, Kharar, Mohali	Scheduled
Jaipur / Lucknow / Ludhiana	City areas	Scheduled

Section 14 – How to Book in Delhi: Step-by-Step

Step	Action	Time
Step 1 – Contact	Call or WhatsApp. Share your diagnosis, prescribed device, required mode (S, S/T, AVAPS), and your Delhi NCR address	~2 minutes
Step 2 – Prescription Check	Send your prescription via WhatsApp. The team will confirm the correct device model and configure settings accordingly	5–10 minutes
Step 3 – Add Equipment	If needed, add equipment to your package such as a hospital bed, oxygen concentrator, suction machine, or pulse oximeter	During the same call
Step 4 – Confirm & Pay	Pay via UPI, bank transfer, or cash on delivery. A refundable security deposit may apply for high-value equipment	~5 minutes
Step 5 – Delivery & Setup	The team delivers to your home, sets up the machine, and provides ~45-minute caregiver training	Same day

Section 15 – Frequently Asked Questions

Q1: What is the difference between a BiPAP and a home ventilator?

A BiPAP delivers two pressure levels (IPAP and EPAP) to support breathing. Most BiPAPs only work when the patient initiates a breath. A home ventilator (like the ResMed Stellar 100) can take full control of breathing delivering mandatory breaths at a set rate even if the patient makes no effort at all. For most COPD and OSA patients, a BiPAP in S/T mode is sufficient. ALS and SCI patients typically need a full ventilator.

Q2: Can I rent a home ventilator without a prescription in Delhi?

No. Home ventilators and BiPAP machines in S/T and AVAPS mode are medical devices that must be configured to a specific prescription. Using incorrect pressure settings can worsen respiratory failure. Healthy Jeena Sikho requires a written prescription from a qualified pulmonologist before configuring and delivering these devices.

Q3: My relative was just discharged from AIIMS/Safdarjung – can you deliver the same day?

Yes – this is one of our most common requests. Call us the moment you receive the discharge date. Share the prescription by WhatsApp. We will deliver and set up the equipment at your Delhi home before the patient arrives. For AIIMS and Safdarjung, which are centrally located, we typically manage same-day delivery to South, Central, and West Delhi within 4–6 hours of booking.

Q4: Does the BiPAP rental include humidifier and mask?

Ventilator on Rent in Delhi – Home ICU Guide 2025 Yes. Every BiPAP rental from HJS includes a sanitised mask (type selected based on prescription and patient anatomy), tubing, and humidifier where required. Heated humidifiers are particularly important for patients using the machine for more than 4 hours per day, as dry air at high pressure can cause significant mucosal irritation and secretion build-up.

Q5: How does the ResMed Stellar 100 work during a power cut in Delhi?

The Stellar 100 has an internal 8-hour lithium battery that activates automatically when mains power is interrupted. This means a standard Delhi power cut will not affect the patient at all. For households with frequent or long power outages, we recommend also having an external inverter/UPS for the oxygen concentrator, which does not have an internal battery.

Q6: My COPD patient is already on 24-hour oxygen. Does he still need BiPAP?

Quite possibly, yes. Oxygen alone treats hypoxemia (low SpO2) but does not address hypercapnia (high CO2) which is the greater danger in advanced COPD. BiPAP actively ventilates the lungs, removing CO2 and resting the respiratory muscles. In fact, giving high-flow oxygen without BiPAP to a hypercapnic COPD patient can suppress their breathing drive and worsen their condition. Ask your pulmonologist about BiPAP addition.

Q7: What mask type is best for a home ventilator patient?

For non-invasive home ventilation, a full-face mask (covering both nose and mouth) is generally preferred for patients requiring high pressure support or who are mouth-breathers. Nasal masks are used for lower-pressure CPAP/BiPAP where the patient can keep their mouth closed. For patients who find full-face masks claustrophobic, a total face mask covering the entire face is an option. HJS provides all three types and will help select the right fit.

Q8: Can I upgrade from a Lumis 100 to a Stellar 100 mid-rental if needed?

Yes. This is one of the most important services HJS offers for ALS and NMD families. As the disease progresses and ventilatory needs increase, you can upgrade your rental at any time. The Lumis 100 is returned, the Stellar 100 is delivered and reconfigured. The security deposit difference is adjusted, and your rental month continues without interruption.

Q9: What is AVAPS mode and when is it needed?

AVAPS – Average Volume-Assured Pressure Support – is a mode available on the Lumis 150 ST-A, Philips A40, and Stellar 100. Instead of delivering fixed pressure, it automatically adjusts the pressure breath-by-breath to guarantee a target tidal volume (the amount of air moving in and out of the lungs). This is critical for ALS patients whose lung compliance changes over time – fixed pressure that works today may be insufficient in three months. AVAPS adapts automatically, maintaining consistent ventilation.

Q10: Is home BiPAP/ventilation safe without a nurse present 24/7?

Home ventilation is safe with a well-trained caregiver – who does not have to be a nurse, but must be trained in the specific tasks. HJS provides training on mask fitting, alarm response, SpO2 monitoring, airway clearance, and emergency procedures. A nursing agency can supplement family care for 12-hour shifts if required. Most families in Delhi successfully manage home ventilation with one trained family member and 12-hour agency nursing.

Q11: How often should the BiPAP circuit and mask be cleaned?

The mask cushion should be wiped daily with a damp cloth and washed with mild soap weekly. The tubing should be washed weekly and allowed to air dry completely before use. The humidifier water chamber should be emptied daily, washed, and refilled with distilled water – never tap water, which causes mineral deposits and bacterial growth. The air filter on the machine should be cleaned every 2 weeks (foam filter) and replaced every 6 months (fine filter).

Q12: My relative has a tracheostomy – can you still support home ventilation?

Yes. The ResMed Stellar 100 supports both non-invasive (mask) and invasive (tracheostomy) interfaces. For trach patients, a specific circuit and speaking valve arrangement is used. Caregiver training for trach care is more intensive and HJS will schedule a dedicated training session. We also coordinate with the discharging hospital's respiratory therapy team to ensure continuity.

Q13: What is the cost of a 24/7 nurse for a home ventilator patient in Delhi?

This is outside HJS's direct service but we can advise. A trained home care nurse in Delhi for ICU-level patients typically costs Rs. 800–1,500/shift (12-hour shift). For 24/7 coverage, that is Rs. 1,600–3,000/day or Rs. 48,000–90,000/month. Many families opt for 12-hour agency nursing combined with a trained family caregiver for the other 12 hours.

Q14: What should the family do if the doctor says the patient needs a tracheostomy?

A tracheostomy is a surgical decision made by the ENT and ICU team when non-invasive ventilation is no longer sufficient (typically when the patient cannot maintain secretion clearance, or requires more than 16 hours/day of full ventilatory support). Once the trach is performed and the patient is stable, home discharge on the Stellar 100 in invasive mode is possible. Call HJS before the procedure date so we can prepare the correct trach circuit and arrange home setup.

Q15: Do you offer a monthly check-in service for long-term ventilator rentals?

Yes. For all long-term ventilator and BiPAP rentals in Delhi NCR, HJS conducts a monthly phone check-in with the primary caregiver. We also offer a quarterly in-person machine service visit for patients on the Stellar 100, Lumis 150 ST-A, and Philips A40. Machine data (AHI, usage hours, leak data) is reviewed and shared with the treating pulmonologist on request.

Section 16 – Why Delhi Families Trust Healthy Jeena Sikho for Home Ventilation

Our Advantage	What It Means for Your Patient
9+ Years in Respiratory Home Care	We have handled a wide range of conditions – COPD, ALS, SCI, post-ICU discharge
Prescription-Specific Configuration	Every BiPAP/ventilator is set according to the exact medical prescription – no generic settings
Full Ventilator Range in Stock	From basic BiPAP S mode to advanced devices like ResMed Stellar 100 – everything available in one place
Same-Day Delhi NCR Delivery	Urgent cases (e.g., post-ICU discharge) can be delivered within hours
45-Minute Caregiver Training	In-person, hands-on training with a written emergency checklist provided
24/7 WhatsApp Helpline	Real human support with quick responses – even for late-night emergencies
Free Machine Replacement	Any equipment fault during rental is replaced the same day at no extra cost
Home ICU Package	Complete setup: bed + ventilator + oxygen concentrator + suction + oximeter – all from one provider
Upgrade Flexibility	Easily upgrade devices as patient condition changes (e.g., Lumis to Stellar) without hassle
1 Lakh+ Patients Served	Extensive experience in complex respiratory home care across Delhi NCR